The guide rail type lifting platform is a non scissor type hydraulic lifting mechanical equipment. It is used for goods transmission between floors of industrial plants, restaurants and restaurants on the second and third floors. The minimum height is 150-300mm, which is suitable for workplaces where pits cannot be excavated. The chain guide rail lifting platform has the advantages of stable operation, simple and reliable operation and economic and convenient cargo transmission.
The working principle of the guide rail lifting platform is that it has a large bearing capacity because it is hydraulic power, and can realize layered control between floors. Side oil cylinders or bilateral oil cylinders are adopted. During lifting, the motor drives the gear pump to rotate and pump oil into the oil cylinder. The oil cylinder works upward under the pressure of hydraulic oil to drive the chain to rise upward. The chain is fixed on the loading table to raise the loading table; When descending, under the action of the dead weight of the table, the hydraulic oil of the oil cylinder is returned to the oil tank through the solenoid valve, so as to make the table descend smoothly.
Due to its low requirements for the installation environment, the guide rail lifting platform does not need deep excavation of the foundation. It can also be installed under the condition of small space. There is no machine room above the hoistway, which is convenient for maintenance, strong stability and space saving. Compared with elevators and freight elevators, its cost is relatively low, which has become one of the important reasons why many customers like it.
导轨式升降平台故障率低：由于采用了先进的液压系统， 且有良好的控制方式，电梯运行故障率可将至。 耗电量少：液压电梯下行时， 靠自重产生的压力驱动，大幅度节能。
Low failure rate of guide rail lifting platform: due to the use of advanced hydraulic system and good control mode, the failure rate of elevator operation can be minimized. Low power consumption: when the hydraulic elevator goes down, it is driven by the pressure generated by its own weight, which greatly saves energy.
It only needs to dig a pit of more than ten centimeters to ensure the convenience of goods in and out, and facilitate the installation and use of equipment.
Hydraulic cylinder, special heavy chain, steel wire rope and multi-slave protection ensure the safety of equipment operation and use.
It can directly adopt slope treatment without pit, which is very convenient for equipment installation and use space and occasions.
The above is today's content sharing provided by Shandong elevator. For more wonderful content, please click our website http://www.jlsjj.cn
We will have more content for you later